by admin admin No Comments

You Might Have To Replace Your Commercial Metal Roof If It’s Showing These Signs

There is no doubt about the fact that metal roofing is one of the best commercial roofing options in the market. It is known for its durability and insulation properties. However, it would be wrong to assume that your commercial metal roof won’t need replacement. Albeit late but your metal roof will need to be replaced at some point. You can surely extend its life by making sure it is installed properly in the first place and by following its maintenance requirements. Below, we have listed some common signs that indicate your metal roof has served its time.


Signs of rust tell a lot about the condition of a metal roof. Firstly, it is a clear indication of tarnish. Secondly, it shows that the protective coating of your roof has worn off. As soon as the coating or finish gets deteriorated, water and moisture will start to come in contact with the metal, which needless to say, causes rust eventually. It is essential to get your roof inspected at fixed intervals so that signs of rust are noticed well before leakage starts to happen. Many commercial building owners get to know about rust only when their roof starts to leak. When getting your roof inspected, make sure areas such as ridge caps, flashings, skylights, seams, fasteners, vents are especially examined.


It does not matter whether your metal roof is leaking a little or a lot, we will advise you to contact metal roof experts straightaway. It is true that most leaks are caused by rust, but there are many other possible causes of metal roof leaks. For example, warped or loose panels can easily allow water to penetrate through new openings. It is essential to understand that at first, water leakage might not look like a serious problem. But if ignored for long, it can cause damage to building materials, electrical systems, and create conditions for mold to grow.

Loose Panels

We have already mentioned above that one of the causes of water leakage in metal roofs is loose panels. Your facility can get damaged due to loose panels caused by high winds, storms, and warping. You might not know this but thieves, who usually enter facilities through windows and doors, can also make their way inside your facility through loose panels. Not just thieves, rodents, and other animals can enter your facility through loose panels. Birds can form nests in the ceiling or the wall of your facility, which can pose safety and health hazards.

Even the most properly installed and well-maintained metal roofs are given in extreme weather conditions and age. If you notice any of the above-mentioned signs in your commercial metal roof, get in touch with Metal Guard immediately. We will properly inspect your metal roof to ascertain whether it needs to be repaired or replaced completely. For professional commercial metal roof repair or replacement, look no further than MetalGuard.

by admin admin No Comments

Is Your Metal Building Energy Compliant?: Tips From Expert Metal Building Insulation Suppliers

With the energy-efficient building market to develop at an 8.17% CAGR (by 2027), the concept of green in construction and architecture has claimed its space for good within the economy. Metal structures are a popular choice among architects and construction engineers due to their design flexibility, high value-to-cost while being cost-effective for practical and aesthetic purposes. With the site and labor costs rising each day, metal offers a more affordable solution for meeting large site requirements such as warehouse needs, contemporary-styled performing arts center, or even a traditional-style church. However, the impeccable conduction power of metal makes it difficult to keep the heat out. This makes the occupants and sensitive components stored within the building vulnerable to extreme temperature shocks or other types of damage.

This further makes building insulation more difficult while leading to higher energy consumption to maintain a comfortable environment. With governments worldwide putting an increased emphasis on zero-energy buildings, the IECC (International Energy Conservation Code) outlines a set of energy codes for all metal buildings. Here’s what you need to know:

Checking Compliance With The Energy Codes

The IECC sets ground rules and standards for states while outlining guidelines for building design, materials, and performance related to the energy efficiency of buildings and structures.  

The code covers every aspect of the building, including walls, windows, doors, panels, insulation, HVAC system, power and lighting, ventilation, and even air leakage.

Depending upon your regional zone ( location-wise segregation from 0 to 8 with eight being the coldest) and type of building, your energy requirements must be fulfilled.

Pro tip from our metal building insulation suppliers: Run an energy audit with the help of an expert to correctly estimate what’s costing you per month.

The standard formula for estimating energy compliance is the R/U ratio. R refers to the resistance of a material to let heat pass through it, and U refers to the amount of heat or cold passing through a system. The higher the R/U value, the better the energy standards.

Additionally, professional metal building insulation suppliers also use continuous insulation (ci) and linear systems (ls) on the exterior and interior of a metal building for adequate insulation.

With that being said, here are a few ways to make your metal building more sustainable and energy compliant:

  • Install a cool roof to decrease the burden on your AC system.
  • Plug air leaks to prevent the mixing of outer air with your inner environment.
  • Invest in renewable energy sources such as solar energy, wind turbines, and geothermal heating systems to reduce your dependency on electricity.
  • Incorporate rainwater harvesting tanks and switch to tankless water heaters.
  • Go for the highest R-value insulation to maximize energy savings and maintain a comfortable inner environment.

The points mentioned above are more of a generalized solution for energy compliance. Depending upon your building structure, location, and usage, a professional building contractor can provide more accurate suggestions as per the level of insulation needed by your building structure and combinations that will be more effective. Besides, it’s always cheaper to move under the proper guidance than to circle back and re-do them.

For expert assistance, reach out to us at +713-449-3430 or browse our website.